100% Secure Online Shopping

Gate WARFET 1.1 Advanced Controller - With Programming Card

Product Code: GATE-WAF
Out of Stock | Usually dispatched within 24 hours
Loading...

WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings.

 

Thanks to the Pre-cocking and Smart Trigger functions, you can achieve a trigger response similar to a real gun. The Programmable Burst (1-5 rounds) enables you to fire a pre-determined number of BBs, which is very useful in MILSLIM and for using low-caps. Another function is ROF Control, which allows you to reduce ROF, so you can use strong LiPo batteries, and still have ROF just like in a real rifle. If your AEG becomes jammed, the Smart Fuse protects the battery and the motor against damage. It also prevents deep battery drain. Moreover, with WARFET you get: Mosfet, ON/OFF Active Brake, Built-in self-test, Debouncing, and more. Many useful functions, great electrical specifications and conformal coating (military specifications: MIL-V-173C) make the AEG Control System able to meet the needs of most experienced airsoft players.

 

SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED

 

Features:

 

User-friendly configuration via the Tactical Programming Card

Sturdy and super-small size WARFET Power Module

Compatibility with the strongest AEG replicas and batteries (ready to work with LiPo 14.8V, 5000 mAh, 60C)

Tested with car batteries

Super-easy installation - thanks to the Mini Tamiya adapters, you can connect WARFET to the original (stock) wiring

It can work with most built-in MOSFETs

With stock wiring, WARFET reduces melting switch assemblies

In hardwired installation, WARFET draws the energy from the battery directly to the motor, bypassing the mechanical trigger contacts

Resistant to atmospheric conditions (military specifications: MIL-V-173C)

Deep-drain protection for 7.4V, 11.1V, 14.8V LiPoly and 9.6V, 12.8V LiFePO4

Improves battery life, ROF, spring life and gearbox reliability

WARFET Power Module parameters:

 

Wide range of supply voltage: 3-17V

Protection against short-circuits: up to 1000A

Incredibly low current consumption on stand-by: 0,2mA

Ultra-low resistance: 2mΩ

Dimensions: 56x20x9mm

Weight: 9,4g

Tactical Programming Card

 

The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. All you need to do is to connect the Tactical Programming Card between the battery and the Power Module. A big advantage is that there is no need to use any additional wires. The WARFET Power Module can be fitted out of view in your AEG, and you still have easy access to its settings. The Tactical Programming Card communicates with the WARFET Power Module and displays the most recently saved settings. You can simply change them using three buttons.

 

Tactical Programming Card parameters:

 

Supply voltage: 5-17V

Number of LEDs: 29

Number of buttons: 3

Dimensions: 67x53x7mm

Weight: 27,3g

Key functions

 

 

TACTICAL PROGRAMMING CARD

The outstanding Tactical Programming Card provides you with very easy access to the AEG Controller settings. All you need to do is connect the Tactical Programming Card between the battery and the Controller.

 

 

PRE-COCKING

Victory in the game is often a matter of fractions of seconds. Thanks to the PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly. You can set the time of PRE-COCKING using the Tactical Programming Card. There are two PRE-COCKING MODES:

1) AUTO MODE – the spring is automatically compressed after each shot,

2) TRIGGER MODE – the first trigger action compresses the spring, and the second trigger action fires the shot.

 

Please note: using PRE-COCKING increases wear and tear on the gearbox. PRE-COCKING is designed for SEMI mode. In the AUTO mode, it can result in blank shots.

 

 

PLUG&PLAY

Super-easy installation, just plug and play. No soldering required. All you need to do is connect the battery and the rifle to the AEG Controller.

 

 

PROGRAMMABLE BURST

The burst enables you to shoot a pre-determined number of BBs (1-5 rounds), which is very useful in MILSLIM and when using low-caps. You can transform AUTO MODE to BURST MODE or SEMI MODE to BURST MODE*. The Tactical Programming Card allows you to set the burst time. The AEG Controller automatically corrects the burst time according to the voltage level of the battery.

*SEMI to BURST in modified installations only.

 

 

3RD BURST

Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode.

If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots. The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in burst time with a decrease in the rate of fire due to battery discharging.

*SEMI to BURST in enhanced mode only

 

 

CONFIGURABLE FIRE SELECTOR

The function gives you the option to program your fire selector. There are five modes:

- STOCK WIRING SEMI/AUTO

- STOCK WIRING SEMI/BURST

- MODIFIED WIRING SEMI/AUTO

- MODIFIED WIRING SEMI/BURST

- MODIFIED WIRING BURST/AUTO

 

 

RATE OF FIRE CONTROL

This ensures there is no loss of the rifle’s rate of fire, so you can use stronger LiPo batteries, and still have ROF just like in a real gun.

 

 

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control system. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery. The Smart Trigger is most effective when the Burst time is set at 3 rounds.

 

 

BATTERY PROTECTION

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, the Controller will not allow firing.

 

 

SMART FUSE

We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.

 

 

ELECTRONIC FUSE

We know how important reliability is on the battlefield. That’s why the unit has thermal protection. In tandem with a time-lag fuse, it fully protects your AEG installation.

 

 

ON/OFF ACTIVE BRAKE

The Controller provides you with the opportunity to decide if you want to use the Active Brake function. If you do not need this, you can turn it off easily. It will lead to improving the lifespan of your motor.

 

 

ACTIVE BRAKE

Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such a high rate of fire that you are not able to make a single shot? The Active Brake sorts things out. In SEMI Mode, the brake does not allow for compressing a piston after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. This is important, especially with an AEG power upgrade. After releasing the trigger, the rifle immediately stops firing. So, you gain more realism and, additionally, you do not waste your precious ammunition.

 

 

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher rate of fire of the rifle and a faster trigger response, and the contacts are protected against burn out.

 

 

DEBOUNCING

This provides full compatibility with the micro-switches. It ensures full resistance to contact bounce (vibration). You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to overheating.

 

 

BUILT-IN SELF-TEST

It allows you to quickly check whether the AEG Controller works properly. If you have problems with your AEG, the BUILT-IN SELF-TEST allows you to check that the problem is not caused by the Controller.

 

 

3RD GENERATION MOSFET

The advent of modern transistors and microcontroller has enabled us to create the smallest and most reliable AEG Controller on the market.

 

 

DARK MODE

DARK MODE allows you to turn off the green LED which lights up when a gun is firing. This function is especially useful during night games.

 

 

COATING

Thanks to its special conformal coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C).

 

 

14.8V LI-PO READY

The system can be used with batteries up to 14.8V LI-PO. Minimum operating voltage is 3V and maximum voltage is 17V.

 

 

HARDWIRED

In the case of a hardwired installation, the Controller draws the power from the battery directly to the motor, bypassing the mechanical trigger contacts. This requires a modification of the AEG installation.

 

 

MINI TAMIYA READY

Thanks to the Mini Tamiya Adapters included in kit, you will be able to smoothly connect AEG Control System to your original installation.

 

 

PRINTED QUICKSTART

It makes easier starting your adventure with a new product. The quickstart contains basic information and hints.

 

 

Included in the kit:

 

Tactical Programming Card

WARFET Power Module

Battery Mini Tamiya adapter

AEG Mini Tamiya adapter

Pair of Deans-T Connectors

Single Trigger Wire

Double Trigger Wire

Quickstart Guide

Be the first to review Gate WARFET 1.1 Advanced Controller - With Programming Card. Write a review

Delivery

We will endeavour to despatch your package within 24 hours although at peak times this may take slightly longer.

Please bear in mind the couriers delivery Monday to Friday between the hours of 8am and 6pm (0800 - 1800 hours) except for holidays. We do not directly control the couriers and we cannot obtain a specific delivery time from them. Delivery may be delayed by extreme weather and events and again is out of our control.

Cost of Delivery

The cost of delivery will be added to your order total. You can select your preferred method of delivery from the options displayed at the checkout. Please select the correct option for your country to ensure that your order is not delayed. We reserve the right to adjust shipping methods and costs but this is usually done in your favour and you will be informed by email.

In addition to this, if our courier cannot deliver goods to a premises and the goods are returned to EZ Distribution then the customer will be charged for the delivery back to EZ Distribution and then charged for a second delivery.

Important

All deliveries must be checked by the receiver (customer) BEFORE signing for them. If the package is damaged in anyway either refuse to accept delivery or ask the delivery person to check the contents with you. You should only sign for the goods if you are satisfied. In any other circumstances, please sign the package receipt as "not checked". If a customer fails to follow this and a package is signed for as received in good condition. We may find it difficult (or impossible) to claim compensation in this case.


UK Mainland

Standard shipping 24 hour via UPS. (Max 30kg for non RIF purchases, 10kg max for RIF purchases.)

Northern Ireland, Inverness, Highlands & Islands may incur an extra charge for delivery.

Near EU Shipping (up to 20kg) ?15 - Applies to Belguim, France, Germany, Ireland, Luxembourg, Netherlands

Far EU Shipping (up to 20kg) ?20 - Applies to Andorra, Austria, Bulgaria, Czech Republic, Denmark, Estonia, Finland, Greece, Hungary, Italy, Latvia, Lithuania, Monaco, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

Please Note

It is the responsibility of the purchaser to ensure the legality of importation into their own country. EZ Distribution can not accept any responsibility whatsoever if the goods ordered are seized by Customs officials or airport authorities in ours or any other country. If goods are seized, destroyed, damaged through inspection or confiscated in any instance, we accept no responsibility and will offer no form of refund or credit. If the goods are returned to us by the seizing authority, we will refund your payment for the goods (not the shipping cost) less any fines or charges imposed by that authority for the handling and return of said goods. We will issue the refund only WHEN the goods are received and checked by ourselves.

Sage Pay

Sage Pay’s systems are scanned quarterly by Trustwave which are an independent Qualified Security Assessor (QSA) and an Approved Scanning Vendor (ASV) for the payment card brands.

Sage pay is also audited annually under the Payment Card Industry Data Security Standards (PCI DSS) and is a fully approved Level 1 payment services provider, which is the highest level of compliance. We are also active members of the PCI Security Standards Council (SSC) that defines card industry global regulation.

PayPal

PayPal protects your financial information with industry-leading security and fraud prevention systems. When you use PayPal, your financial information is not shared with the merchant. Once your payment is complete, you will be emailed a receipt for this transaction.

Top